Frigidaire 25.6-cu ft Standard-Depth 36-in Wide Side-by-Side Refrigerator with Ice Maker ,Water and Ice Dispenser (Fingerprint Resistant Stainless Steel)

Choosing this appliance

The standard-depth side-by-side layout provides separate vertical refrigerator and freezer sections.

Compare the compartment layout with the groceries and containers you normally store. Consider fresh-food access, frozen-food organization and the way the doors open in your kitchen. Check dispenser and ice features in the exact model specifications. Capacity alone does not show whether a particular shelf arrangement works well for wide trays or frequently used items.

Compare the appliance with the tasks you perform most often, rather than choosing by exterior size alone. List the features you will use regularly and separate them from features you may rarely need. Consider who will operate the controls, how easily they can read the settings, and where frequently used items will be placed. Use the exact model specifications to compare alternatives.

Check the finish alongside the surrounding cabinets, work surfaces and other appliances in the same lighting. Similar finish names can have different tones or textures. A manufacturer reference photograph helps identify the design, while the photographs and listing for the individual item establish what is offered. Keep the complete model number available when discussing an appliance with your installer.

Think through a typical busy day in the space. Allow room for another person to pass while the appliance is in use, and consider whether nearby drawers or doors would compete for that room. Operating convenience depends on the layout as well as the appliance features. Resolve the features that matter most before choosing between closely related model numbers.

The FRSS26L3AF capacity split puts 16.6 cubic feet in fresh-food storage and nine cubic feet in the freezer. Compare that balance with your weekly groceries, especially if bulk frozen purchases take more space than fresh ingredients. The vertical freezer arrangement favors organized shelf loading, so consider the width of your largest frozen packages.

Planning the fit and layout

Use the 36.125-inch actual width and 69.875-inch height with hinge when assessing the opening.

Measure the delivery path and final opening, then check door swing and drawer extension separately from cabinet depth. Allow the operating clearances specified by the manufacturer. Plan access to the electrical supply and any water connection required by the model. Consider nearby walls and handles when deciding whether each door can open sufficiently for routine use.

Measure from the finished surfaces that will remain after installation. A cabinet opening may change when flooring, a countertop or trim is replaced, so record the final usable width, height and depth. Compare the installation drawing with the opening, not just the advertised appliance size. Record nearby doors, drawers, outlets and utility connections on the same sketch.

Plan the delivery route from the building entrance to the installation area. Measure narrow doorways and turns, and consider steps, floor protection and access around fixed furniture. Discuss any removal or lifting requirements before arranging delivery. An appliance fitting its final opening does not by itself establish that it can pass through every part of the route.

Keep the dimensions and model number together in the project notes so the installer can check them against the exact instructions. Distinguish the overall product dimensions from required cutout dimensions and operating clearances. Where cabinetry must be modified, check the finished drawing before cutting. Leave access to the utilities and any service area required by the manufacturer.

Place a frequently used bottle in the planned gallon-bin position when checking storage access. Adjustable door bins can accommodate changing bottle heights, but the door still needs enough opening room for you to reach them comfortably. In a side-by-side layout, check the refrigerator and freezer door paths separately rather than measuring only the combined front width.

Installation and everyday care

The exterior water and ice dispenser needs a household water connection and filter access.

Follow the installation instructions for leveling, door adjustment and any required water connection. Check that the appliance stands securely and doors close as intended. Use the documented initial temperature settings and allow the setup process described by the manufacturer before regular loading. Arrange food so it does not block the interior airflow points identified in the instructions.

Have the installer read the instructions for the complete model number before work begins. Electrical, plumbing and ventilation arrangements can vary between appliances with similar appearances. Compare the site connections with the documented requirements, and use the specified fittings and protection. Keep the installation paperwork with the product records for later maintenance.

After installation, test the basic functions described in the instructions and check accessible connections before the appliance is placed into regular use. Confirm that controls can be reached and doors or panels move freely. Follow the model instructions for initial setup and cleaning. If a setting behaves unexpectedly, consult the troubleshooting steps before changing unrelated connections.

Clean exterior surfaces using the method recommended for the exact finish. Start with a soft cloth and remove spills promptly where permitted by the instructions. Check whether a cleaner is suitable before applying it to a visible panel, control or trim piece. Keep moisture away from electrical controls and avoid using abrasive pads on finished surfaces unless expressly permitted.

Arrange groceries with the EvenTemp airflow layout in mind. Keep packages from covering the interior air outlets identified in the owner instructions, and distribute everyday items so they can be found quickly. The two crispers provide a distinct produce area; reserve suitable shelf positions for prepared dishes instead of filling every available gap around the cooling path.

How do I plan access and future maintenance?

Allow both doors to open and shelves or bins to be removed for cleaning.

Keep the door seals and accessible shelves clean using the methods stated in the owner instructions. Follow the model requirements for any water filter or ice system. Leave ventilation and service access clear around the appliance. When temperature performance changes, check the documented settings, door closure and loading recommendations before diagnosing a component.

Record the complete model number and the serial number from the actual appliance after it is available. Retain the operating and installation instructions with the project records. When a replacement part is needed, match the exact manufacturer parts diagram and model revision rather than selecting a visually similar component. Photograph accessible connections if that will help future servicing.

Keep the area needed for routine cleaning and service reachable. Check that stored items cannot obstruct vents, connections or moving components. If performance changes, note the setting and symptoms before consulting the model’s troubleshooting instructions. Follow the documented process for disconnecting utilities before service work that opens panels or connections.

Make a short maintenance record for tasks described in the owner instructions. Include any separately installed equipment and its model number, such as a filtration component or ventilation accessory. The next person servicing the appliance will then have the relevant identification and layout information available without needing to dismantle finished surfaces just to understand the arrangement.

Distinguish a door-ajar alert from a power-failure alert when checking an unexpected alarm. Start by noting which indication appears and whether either door has been left open during loading. Keep the documented alarm instructions available near the appliance records; these two alerts concern different events and should not automatically be treated as the same cooling fault.

What should I check before ordering?

Confirm FRSS26L3AF and distinguish actual dimensions from rounded common-width labels.

Distinguish cabinet depth, depth with doors and overall depth with handles when comparing fit. Verify any water-supply fitting, filter or installation component needed for the exact model. Check which items are actually present with the individual appliance. Confirm the delivery route and door-opening space before arranging collection or installation.

Compare the complete model number, finish and configuration with the appliance in your project plan. Closely related models may have different controls, utility connections or installation dimensions. Bring the model number and measurements when asking about compatibility so the answer refers to the specific appliance and the space where it will be installed.

Read the current listing and inspect the available photographs for the individual item. Confirm its condition and the parts actually present before ordering; a manufacturer reference image describes the model design. Ask about any accessory, fitting, bracket or trim needed for your installation, and identify the exact part number if it must be obtained separately.

Select the intended store view and check the current quantity and fulfillment options there. Arrange installation after confirming the appliance, the delivery route and any required site preparation. If replacing an existing item, record its model and connections before removal. Compare the installer’s parts checklist with the listing so necessary components can be planned in advance.

Keep a copy of the selected model information with the project measurements. Before arranging collection, discuss the appliance dimensions, handling needs and destination access with the people responsible for moving it. Coordinate any cabinet, electrical or plumbing work that must be completed first. These preparations help avoid having a delivered appliance waiting in an unfinished installation area.

PurePour is the filtration system identified for this model. Record the exact refrigerator model when checking a replacement filter, and verify the filter designation against the owner instructions before purchasing. Plan access to the filter location as part of the kitchen layout, so ordinary filter changes do not require removing shelves full of groceries or moving nearby furniture.