Delta Windemere Oil Rubbed Bronze 2-handle Deck-mount Roman High-arc Bathtub Faucet

Choosing this faucet

Use BT2796-OB when comparing the Windemere Roman tub trim with the installation at your bathtub. Start with the concealed rough-in identification, because matching the visible finish or handle shape does not establish compatibility. Record the existing valve model and compare it with Delta's installation information for this trim. For a new installation, select the compatible rough-in together with the trim before planning the tub deck.

Consider how you will reach the separate handles from outside the bathtub and where the spout outlet will sit over its interior. The outlet should be positioned against the actual bathtub shape and finished deck measurements. Compare the manufacturer's drawing with those measurements instead of estimating from a product photograph. Oil Rubbed Bronze is the named finish for this model; use that complete description when coordinating visible fittings.

Compare available item photographs and listing information with the exact SKU. A manufacturer reference image identifies the design, while questions about the particular item's condition or components should be resolved from the actual listing before ordering. Before arranging a replacement, separate the trim selection from any work needed beneath the tub deck. Record the existing model identification and take clear photographs of accessible connections while they can be seen.

Give those records and the finished deck measurements to the installer when discussing the project. Decide how the area will remain accessible for testing and future service. Keep the old assembly identification with the new trim paperwork so later questions refer to the components actually installed.

Planning the sink layout

Measure the finished tub deck and mark the proposed positions of the spout and both handles. Compare the mounting-hole spacing with the exact trim and rough-in drawings. Check the space needed for each handle to turn without contacting the spout, bathtub edge, wall or another fitting. Include any tile or deck covering that will be present when the trim is fitted.

Check the spout's projection over the bathtub separately from its overall height, and avoid treating those measurements as interchangeable. An overhead sketch can show the tub edge, control positions and outlet position more clearly than a front-view photograph. Ask the installer to check the available space beneath the deck for the rough-in, connections and later service.

A trim change may use an existing compatible rough-in, but that should be verified before the old fittings are removed. For a new deck, confirm the complete mounting layout before drilling. Keep access panels or other planned service routes available, and check that the finished work will allow the concealed connections to be inspected.

Installation and everyday care

Follow the BT2796-OB instructions together with the instructions for the selected Roman tub rough-in. Have the installer check the valve identification, deck measurements and spout connection before fitting the visible trim. Locate the water shutoff and protect the bathtub and finished deck while work is in progress. Use the manufacturer's specified attachment method and parts for the actual assembly; a similar-looking fitting does not establish that it can be substituted.

If work opens a water connection, follow the manufacturer's procedure for flushing and testing before the installation is put into use. Check accessible connections while the faucet runs and after it is shut off. Operate both handles and confirm that the spout discharges into the bathtub as intended. Keep the installation paperwork available for later service.

For routine finish care, consult Delta's instructions for Oil Rubbed Bronze and use the approved cleaning method. Check before using a cleaner or cleaning pad, and avoid transferring residue from deck-cleaning products onto the trim. Dry visible water deposits as directed by the finish-care instructions.

How do I plan access and future maintenance?

Keep the BT2796-OB trim identification and the installed Roman tub rough-in model together in your project records. The visible trim and concealed water-control assembly may require different service parts, so identify which component needs attention before ordering a replacement. A change in handle operation does not by itself identify a particular worn part. Use the manufacturer's troubleshooting information and the appropriate parts diagram for the installed assembly.

Photograph accessible connections and record any separately selected rough-in components while the installation is visible. Maintain the planned access to the deck connections so that an inspection or repair does not require guessing at the concealed layout. Locate the shutoff before beginning work that opens the plumbing. After service, check the accessible connections for moisture and test the hot and cold controls.

For finish care, keep the Oil Rubbed Bronze identification available and follow the exact cleaning instructions when removing deposits. When planning a future trim change, compare the new model's compatibility with the existing rough-in again. Keeping both model numbers helps distinguish a cosmetic trim replacement from work that requires changes beneath the deck.

What should I check before ordering?

Before ordering, compare BT2796-OB, the Windemere collection and Oil Rubbed Bronze finish with the trim you intend to install. Confirm the compatible Roman tub rough-in by model number rather than by the age of the bathtub or the appearance of the handles. The manufacturer identifies this product as trim and specifies a separate rough-in, so plan the two parts of the installation together.

Review the particular store listing and photographs to establish which components accompany that item. If anything is unclear, resolve it before scheduling installation. Give the installer the exact model numbers and the finished deck measurements when discussing fit. For a replacement, keep photographs of the existing spout attachment and accessible rough-in identification with those records.

For a new installation, compare the required rough-in and trim arrangement with the proposed hole layout. Check any separately selected fitting on its own listing. Similar bronze finish names across brands can have different tones, so use the named finish and actual photographs when coordinating the room. Check the current quantity and fulfillment choices in the selected store view.